MOLD DAMAGE

Mold damage remediation is a very serious undertaking best handled by certified, trained professionals. That is why All Service stands out in the remediation industry. All Service is certified in the field of Health and Safety by both OSHA and the IICRC and also holds both Microbial Remediation Technician and Microbial Remediation Specialist certifications with the IICRC. All Service specialists have re mediated hundreds of individual mold claims throughout central and southeast Michigan, and have re-established indoor environmental health and peace of mind for numerous families and business owners.
 

Depending upon the extent and the circumstances of the damage, the methods of removing the mold may vary. Any wood, drywall or other cellulosic building materials which show signs of microbial growth must be sanitized on site, removed and discarded. All Service provides cartage also for all materials removed from the property. Any studs, trusses, joists or other load bearing materials which have been affected by mold will either be sanitized, sanded and sealed with anti-microbial primer or they will be reinforced and cut away. A large part of correctly remediating mold damage is to ensure that damage is not likely to occur again, and this is done by fixing the source of the damage and removing ALL the present spores entirely. All Service specialists install vapor barriers known as "clean rooms" between the afflicted areas and the rest of the property in an effort to prevent spores from traveling through the air and settling elsewhere. These "clean rooms" are sealed until the damaged materials are secured, after which everything within the clean room is gone over thoroughly with a HEPA-vacuum and then removed from the property and sanitized.
 
After all afflicted areas have been rid of mold growth, every inch is sanitized with anti-microbial post treatments and/or sealed with anti-microbial primer.

This is to ensure that in the event of another water damage, microbial growth will be much less likely to thrive in the same area. Another important step in finalizing the remediation is to clean and sanitize any upholstery or carpeted area within proximity or contact of afflicted materials.
 
Unfortunately, natural fibers such as wool carpeting or cotton upholstery cannot be salvaged once microbial growth has begun, but synthetic materials like polyester and nylon are not susceptable to mold growth and are rather easily cleaned. Cleaning the H-VAC system may also be neccessary if any of the vents or returns have been affected by water damage or microbial growth.
 
If you have a microbial / mold issue or would like to speak to an All Service specialist, please Contact Us for additional information or to set up an appointment.